antas-193 Sealant Silikon Kalis Cuaca

Packaging : 300mL, 500mL, 590mL


antas-193 is one-component, neutral curing weatherproof silicone sealant, specially designed for waterproof purpose for curtain wall, sealing sandwich panel and wood wall. And it can be widely used in broad temperature range and cured by the moisture in air. With outstanding performance of anti-UV radiation, anti-ozone and anti-high and low temperature, it has excellent adhesion to most building materials.
Product feature
  1. Neutral curing, no pollution or corrosion on metal, coated glass, concrete, marble and other building materials
  2. Excellent adhesion to most building materials
  3. Movement capacity:±35%
  4. Excellent weathering performance with over 15 years’ service life under general environment.
  5. Excellent performance within broad temperature range. The cured sealant will not change to be brittle, hardened or cracked at -50 ℃. It will not change to be soft and deteriorated, and will keep good strength and flexibility at 150 ℃.
  6. Compatibility with other neutral silicone sealants.
  7. Ideal material for jointing, sealing, bonding and moving joints.
Main purpose
  1. Bonding joints with high performance of weather ability for curtain wall.
  2. Sealing the gap of the construction wall, sandwich panel and wood wall.
  3. Other bonding and waterproof for general purpose.
Standards compliant
ASTM C920
GBT14683-2017
GB/T 22083-2008
JC/T 882-2001

 
Technical parameters
Technical parameters
Tidak. Test items GB/T 14683-2017 index Measured value
1 Appearance Even, exquisite paste,  Even, exquisite paste,
no bubble, no skinning, no gel  No bubble, no skinning, no gel
2 Density, g/cm3 Specified value±0.1 1.42
3 Sag degree(Vertical), mm ≤ 3 0
4 Tack free time, h ≤ 3 1
5 Extrudability, ml/min ≥ 150 592
6 Elastic recovery rate, % ≥ 80 92
7 Tensile Modulus (23ºC), MPa  0.4   0.9
8 Adhesion at constant load No destruction No destruction
9 Adhesion after water immersion at constant load No destruction No destruction
10 Adhesion after hot-press & hard-draw at constant load, % No destruction No destruction
11 Adhesion after water &UV-radiation at  constant load, % No destruction No destruction
12 Mass loss rate, % ≤8 3
13 Alkane Plasticizer Not be check out Not detected
Use restrictions
antas-193 should not be applied:
1. For structural bonding.
2. On the surface of substrate that bleeds oil, plasticizer or solvent and so on (such as impregnated wood).
3. In totally confined spaces.
4. When substrate surface temperature beyond 40℃ or below 5℃.
5. In continuous water immersion or on the surface with fog, or wet surface, or in continuous wet place
6. On paint surface